PVC Saddles

PVC Saddles

15 Items

Set Descending Direction
  1. NDS - 8" X 2" Rigid Clamp-It™ Saddle - S X FPT
    4480-20 NDS - 8" X 2" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  2. NDS - 4" X 1" Rigid Clamp-It™ Saddle - S X FPT
    4440-10 NDS - 4" X 1" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  3. NDS - 4" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT
    4440-15 NDS - 4" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  4. NDS - 2" X 1-1/2" Rigid Clamp-It™ Saddle - IPS X FIPT
    4220-15 NDS - 2" X 1-1/2" Rigid Clamp-It™ Saddle - IPS X FIPT
    In Stock
    Out of Stock
     
  5. NDS - 3" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT
    4430-15 NDS - 3" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  6. NDS - 3" X 2" Rigid Clamp-It™ Saddle - S X FPT
    4430-20 NDS - 3" X 2" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  7. NDS - 6" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT
    4460-15 NDS - 6" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  8. NDS - 3" X 1" Rigid Clamp-It™ Saddle - S X FPT
    4430-10 NDS - 3" X 1" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  9. NDS - 2" X 1" Rigid Clamp-It™ Saddle - S X FPT
    4220-10 NDS - 2" X 1" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  10. NDS - 8" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT
    4480-15 NDS - 8" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  11. NDS - 4" X 2" Rigid Clamp-It™ Saddle - S X FPT
    4440-20 NDS - 4" X 2" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  12. NDS - 6" X 2" Rigid Clamp-It™ Saddle - S X FPT
    4460-20 NDS - 6" X 2" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  13. NDS - 4" X 1-1/4" Rigid Clamp-It™ Saddle - IPS X FIPT
    4440-12 NDS - 4" X 1-1/4" Rigid Clamp-It™ Saddle - IPS X FIPT
    In Stock
    Out of Stock
     
  14. NDS - 2-1/2" X 2" Rigid Clamp-It™ Saddle - S X FPT
    4225-20 NDS - 2-1/2" X 2" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     
  15. NDS - 2-1/2" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT
    4225-15 NDS - 2-1/2" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT
    In Stock
    Out of Stock
     

Get the Best Poly and PVC Saddles or Saddle Clamps for Pipe Systems

If you’re looking for PVC irrigation pipe saddles or PVC clamp saddles, you’ve come to the right place! Our Rigid Clamp It™ PVC pipe saddles and other saddle fittings keep your irrigation or sprinkler system supply pipes water-tight and structurally sound for years to come!

We only carry top-rated saddle fittings from the industry’s best brands. Shop NDS, Lasco, Blazing, King Innovation, Dawn Industries and more!

Just click to order, and hey – did you know? You can save an extra 1 percent on each order through Reinders.com when you sign up for a Pro Login account today! Join the growing number of commercial turf, landscaping and irrigation professionals who’ve watched the savings add up with Reinders!

Find Clamp It™ and Other Saddles for PVC Water Supply Pipe

Time to saddle up, with Reinders’ durable, rigid PVC and poly saddles for irrigation system pipe!

A pipe saddle is any pipe support that cradles a pipe and transfers the pipe's load weight onto a supporting base. Much like a saddle on a horse supports a rider and keeps them from bouncing on the animal, pipe saddles support the weight of pipes.

Because of PVC’s rigidity and resistance against quick-burst types of forces, it’s ideal for use as pipe supports. PVC or poly plastic saddle fittings are also useful when you want to add a take-off along an existing water distribution or supply pipe.

PVC Clamp It™ pipe saddles

Clamp-It™ Saddles allow particularly quick, easy and reliable irrigation or sprinkler system piping support. They can also be used for the addition of branch lines to existing piping systems. With no bolts, washers or nuts, these clamp-on saddles mean less installation labor, space and time. And their rust resistance means less maintenance and replacement costs.

National Diversified Sales (NDS) - the supplier of these clamp-on saddles, is one of the leading US sources of stormwater management, landscape irrigation and flow management components. NDS has a stellar reputation for high-quality, durable irrigation fittings.

All the following Clamp-It™ saddles we carry for PVC pipe main line are made of Type 2 PVC with the following specifications:

  • Pressure-rated at 200 PSI at 72˚ degrees Fahrenheit
  • NSF/ANSI 61 and 372 certified

Our wide variety of Clamp-It™ sizes include:

NDS - 4" X 2" Rigid Clamp-It™ Saddle - S X FPT

NDS - 6" X 2" Rigid Clamp-It™ Saddle - S X FPT

NDS - 3" X 2" Rigid Clamp-It™ Saddle - S X FPT

NDS - 2" X 1-1/2" Rigid Clamp-It™ Saddle - IPS X FIPT

NDS - 3" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT

NDS - 4" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT

NDS - 2-1/2" X 1" Rigid Clamp-It™ Saddle - S X FPT

NDS - 2-1/2" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT

NDS - 2" X 1" Rigid Clamp-It™ Saddle - S X FPT

NDS - 6" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT

NDS - 8" X 2" Rigid Clamp-It™ Saddle - S X FPT

NDS - 4" X 1" Rigid Clamp-It™ Saddle - S X FPT

NDS - 2-1/2" X 2" Rigid Clamp-It™ Saddle - S X FPT

NDS - 3" X 1" Rigid Clamp-It™ Saddle - S X FPT

NDS - 8" X 1-1/2" Rigid Clamp-It™ Saddle - S X FPT

NDS - 4" X 1-1/4" Rigid Clamp-It™ Saddle - IPS X FIPT

We also carry the Lasco - 2" X 1.5" Acme Tap’t Saddle for sprinkler and irrigation system pipe support. Made of rigid PVC and CPVC compounds, this popular pipe saddle offers a strong ACME thread joint with an elastomeric seal enclosing plastic piping components.

Pressure-rated at 235 PSI, this fitting for polyethylene, water-supplying pipes also features a molded neoprene gasket seal to counteract burrs and misaligned holes. And the industrial-strength, 304 stainless steel hardware is enclosed, so you don’t have to worry about lost or dropped pieces. (Also comes in 3” X 1.5”.)

  • Not for use with compressed air or gases
  • Meets ASTM D-1784 specifications - rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
  • Meets ASTM F-2768 specifications - ACME thread joint with elastomeric seal in plastic piping components
  • 304 stainless-steel hardware is captured or retained, no loose pieces to drop
  • Molded neoprene gasket seal to compensate for burrs and misaligned holes
  • Use standard 1 ½-inch hole saw for installation
  • Do not use fittings with liquids not recommended

Installation instructions:

Place the saddle on a desired location and mark. Remove saddle, drill hole and deburr.

  • Place saddle over hole and attach easy clamping hinge around pipe.
  • Apply wedge halfway by hand and finish off with a slight tap from a rubber mallet.

King Innovation - 1” Snap Tap Saddle With FPT 90-degree Elbow (Bag of 25). These innovative poly pipe saddles don’t require clamps, tools or fittings for irrigation pipes. The hurricane handle makes for quicker rotations, and the patented cutting tip cleanly cuts polyethylene pipes for a tight seal every time. A distinctive side-snap latch provides a visible, secure connection. (Also available in 1” X 1 ½” FPT.)

Other details:

  • Ergonomic handle offers 50 percent more surface area to cushion fingers and provide maximum comfort
  • Short thread design allows for quick, easy installation without dirt or pebble clogging
  • Shorter working height requires less digging
  • For 80 and 100 lb., 1-inch 3408/3608 HDPE pipe
  • For 100 and 125 lb., 1-inch 4710 HDPE pipe

We also carry self-tapping poly saddles by Blazing – the original and best-selling self-tapping saddles for irrigation pipe. Self-tapping saddles operate without tapping machines, making them a time-saving alternative to traditional service saddles. No clamping, coring or cutting!

Blazing – 1" Poly Pipe Saddle Swing Pipe Barb.  The Blazing line of self-tapping saddles ensures commercial-grade irrigation installations more than 10 years of life. Made of high-impact ABS, it also contains no metal or chloride like other fittings on the market, making it the most eco-friendly.

This saddle’s swing pipe barb allows for easy access to irrigation pipe so you can connect pop-up type sprinklers with the lateral piping. For use on ¾” to 1-1/2” polyethylene pipe, this saddle swing pipe barb delivers an unrestricted flow of more than 7 gallons per minute at 40 psi and 12 gallons per minute at 60 psi. Easy installation – no clamping, coring or cutting! (Also available in 1 ¼").

Blazing - 1" by 1/2" Poly Pipe Saddle FPT

Blazing self-tapping saddles allow for easy access to the pipe to supply sprinkler or irrigation system water to a different head.

Features and Benefits:

  • For use on ¾-inch to 1-½-inch poly pipe
  • Optimal sprinkler head flow, delivers more than 7 gallons per minute at 40 PSI and 12 Gallons Per Minute at 60 PSI
  • Barbed fitting is a secure fit and easy installation without tools
  • Made of high-impact ABS

We also carry the following sizes:

Blazing - 1" X 3/4" Poly Pipe Saddle FPT

Blazing - 1-1/4" by 3/4" Poly Pipe Saddle FPT

Need a pipe saddle for drip irrigation systems? Check out Blazing’s 1" Drip Barb Saddle.

We also offer the following clamp-less, tool-less saddle tees from Dawn Industries (all products made in the USA). Made of reinforced nylon with ABS bottom pieces, these tool-less saddles offer 41 percent less flow restriction than insert fittings (13.6 gallons per minute at 40 PSI). No Snaps, straps or tools required. Installs six times faster than inserts with worm screw clamps. Superior versatility: Remove it and re-use it!

All Dawn Industries saddles are designed for 80#, 100# HDPE or MDPE pipe in outdoor irrigation. In quick-burst lab tests, the saddles never failed. Rated at maximum 392 PSI for 62 seconds.

To install, simply snap Dawn Industries saddles onto the pipe, and while holding the components in position, place the tap on the saddle. Then, screw the top onto the ratcheting lock until it can no longer turn.

It’s easy to find what you need at Reinders.com, with its extensive inventory of pipe saddle fittings and other reliable, competitively priced products for commercial irrigation, landscaping and turf specialists.

Can’t find what you need? Just contact us!

Or, visit one of our many local Reinders stores, where our friendly, knowledgeable sales associates can help you find just the right equipment, supplies or parts! And don’t forget to sign up for a Pro Login account, so you can get an additional 1 percent off each order through Reinders.com. Join today and watch the savings add up!

New Retail Customers

Creating a Retail Account has many benefits: faster checkout, save multiple addresses, track orders, create wish lists, and more.

Existing Reinders Business Customers

You can quickly connect your existing business account for a simplified shopping experience. Receive all the benefits of a Retail Account plus custom pricing, real-time inventory, access to special promotions, pay your bills online, quick order, and more.

Don’t have a Reinders Business Account yet?

Apply Today!