Hunter - PGV Series - 1" Valve with Flow Control

  • Residential/light commercial
  • External and internal manual bleed allows quick and easy “at the valve” activation
  • Double-beaded diaphragm seal design for superior leak-free performance
  • Encapsulated 24 VAC solenoid with captive plunger for hassle-free service
  • Low flow capabilities allow use of Hunter micro-irrigation products
  • Sold Individually. Manufacturer Pack Size = 20. Pallet Size = 960
Quantity (minimum 1):

Tackle Residential & Light Commercial Irrigation with a Hunter PGV Valve

An irrigation valve is the heart of your irrigation system, which is why you need reliable, top-of-the-line valves to ensure impeccable performance and results. Hunter’s product line features durable, high-grade sprinkler valves that get the job done.

You Can Count on Your Hunter Sprinkler Valves to Work Reliably on Landscape Applications for Years to Come

Build your irrigation system on innovation and performance— it starts with a Hunter PGV valve. Hunter sprinkler valves work in a wide range of applications, from low flow to high flow, clean water to dirty water, low pressure to high pressure.

Introducing: The Hunter PGV Valve
The PGV valve from Hunter is a hard-working, heavy-duty series that offers the best features of Hunter sprinkler valves into one product line. This Hunter irrigation valve is built with enough durability to handle the rigors of most residential and light commercial sites. With availability in numerous configurations, you can make your PGV valve work for you and your project needs.

  • For smaller landscapes: four 1” body configurations including angle, globe, male x male, male x barb
  • For larger landscapes: 1 ½” and 2” globe or angle models

No matter which configuration you choose for your application, all models feature durable, high-grade construction and a rugged diaphragm that supports and prevents stress failure so you can get the most use out of your sprinkler valve for years to come.

You can expect the following features of your Hunter PGV Vale:

  • Quick and easy valve activation, thanks to external and internal manual bleed
  • A double-beaded diaphragm seal design ensures superior leak-free performance
  • DC-latching solenoids enable battery-powered controllers
  • Hassle-free maintenance thanks to captive bonnet bolts
  • Allows use of Hunter’s micro-irrigation products with low flow capabilities
  • Hassle-free service with encapsulated 24 VAC solenoid and captive plunger
  • 150-degree Fahrenheit temperature rating
  • Pressure range recommendation between 20 and 150 PSI

Take note of these Hunter sprinkler valve operating specifications:

Flow rate:

  • PGV 100: 0.2 to 30 GPM
  • PGV 101: 0.2 to 30 GPM

It’s easy to see how Hunter PGV valves combine usability with performance to create an irrigation system product that works the way you need it to for years to come! What’s more, all Hunter valves are 100% water-tested to ensure reliable operation once installed. Can your old sprinkler valve say the same?

Basic Hunter PGV Valve Operations & Parts
Your Hunter irrigation valve has two main components: the lower half known as the valve body the upper half known as the valve bonnet. Below, you’ll discover some of the common parts in your sprinkler valve and how each moving part helps the valve operate.

Basic Valve Parts

Wiring: The wiring of your irrigation valve will lead to the solenoid, which electrically actuates the valve.

Flow Control Handle: In the middle of the valve, you’ll find the flow control handle. This regulates the amount of water that passes through the valve when the valve opens.

Manual Bleeder Screw: Located in the center of the flow control handle, the manual bleeder screw manually actuates the valve.

Accu-Set Pressure Regulator: The accu-set pressure regulator is a field-installed accessory that allows you to dial in the exact pressure you want for after the valve.

Turning Your Valve ON/OFF
For manual valve operation, take the solenoid and make a quarter turn, counterclockwise— you should hear the water start to flow— then let go of the solenoid. After you’ve done your field check on the valve heads and you’re ready to turn the valve off, simply turn the solenoid a quarter turn clockwise. You’ll hear the water stop to signal that you’ve correctly shut off the solenoid.

An In-Depth Look At Your Hunter PGV Vale Operates

The center portion of your PGV valve is the working part of the valve, called the diaphragm.

On top of the diaphragm is a center stem that goes up to a flow control handle— this piece regulates how far the diaphragm opens to allow water to go through when the valve does open.

You’ll find the manual bleeder screw on top of the flow control handle— opening this bleeder screw allows water to evacuate out through that hole, allowing the diaphragm to open, thus opening the valve with it.

The solenoid receives the electricity from the control. This piece of the valve has a plunger on the bottom; when it’s electrically activated, the plunger will rise. Once raised, the small rubber gasket comes off of its port, allowing the water to go down the exhaust port. This action decreases the pressure on top of the diaphragm, allowing it to move up, and allowing the water to flow out to the field.

The valve’s diaphragm operates off surface area differential. It sits horizontally in the valve, with the top surface being a much larger diameter than the bottom side— this difference in surface area is what creates the differential.

The top portion of the valve has a bonnet chamber, when at idle, the diaphragm sits down in the diaphragm seat, where there’s no escape of the water on top because the plunger is down, not allowing water to escape; therefore, pressure is sitting on top of the diaphragm.

When the valve is turned on electrically, the controller prompts the plunger to raise, allowing the pressure and water that sits on top of the diaphragm to escape down the exhaust port and downstream.

Once that water escapes, the pressure on top of the diaphragm drops, allowing it to move upward off of its seat, resulting in the water being able to escape downstream to the heads.

Discover More from Hunter Industries

Hunter Industries is a global manufacturer of water- and energy-efficient solutions designed for residential, commercial, and agricultural applications. Their highly efficient, innovative line of irrigation products helps industry professionals excel at any sized project in any application, thanks to their irrigation valves, spray sprinklers, controllers, and rotary nozzles.

You can discover more professional-grade in-line electric valves from Hunter Industries to ensure your irrigation system works reliably and productively for years to come.

The Reinders Difference

Reinders, Inc. is a family-owned, regional distribution company that carries professional-grade products and supplies for the green industry.

At Reinders, we pride ourselves on having the best selection of reliable products that help you thrive in your business and the unrivaled customer experience that goes along with it.

Our local knowledge of national product lines makes us willing and able to help you find the best match for your project needs. Regardless of if you specialize in residential, commercial, municipal, agricultural, or public-sector application types, we’re here for you.

We stand by our depth of vendors that make a wide selection of products available to you to prepare for every season. We’ve even got the knowledge and expertise on each and every product that sets us apart from the rest.

Our team of industry experts understands your daily challenges, and we are here to provide solutions to all of your needs. Quality products aren’t enough— you get the unparalleled customer service our second-to-none staff offers. 

Whether that starts with a Hunter PGV valve or another one of our irrigation products, we’re here to help you achieve seamless irrigation and save you time, energy, and money.

For product recommendations, herbicide application tips, or to answer any other related inquiry, contact us today!

Hunter Industries
Flow Control
Inlet Size
Inlet Thread
Pressure Rating Range
20 - 150 PSI
  • Cleaning the Diaphragm on a Hunter Valve - Quick Tip
  • Basic Hunter Valve Operation
New Retail Customers

Creating a Retail Account has many benefits: faster checkout, save multiple addresses, track orders, create wish lists, and more.

Existing Reinders Business Customers

You can quickly connect your existing business account for a simplified shopping experience. Receive all the benefits of a Retail Account plus custom pricing, real-time inventory, access to special promotions, pay your bills online, quick order, and more.

Don’t have a Reinders Business Account yet?

Apply Today!