Weathermatic - 1" Plastic Economy Valve

• 150 psi (10,3 bar) rating
• Unique “reverse flow” porting design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure providing zero stress to prevent “stretching,” a common cause of valve failure
• Pressure activated diaphragm
• Normally closed valve for water conservation
• Diaphragm’s self-cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
• Molded shock cone for smooth operation and reduction of water hammer
• Easy-to-use internal manual bleed lever; bleeds valve downstream; has stops for open and closed positions
• High efficiency S20P solenoid with stainless steel actuator
• High-strength glass-filled body and cover with 1/4 in. stainless steel cover bolts and mating brass body inserts
• Non-rising flow control stem throttles valve from full open to closed position on flow control models

Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups

24VAC/60 Hz Inrush: 9.48 VA / Holding: 5.11 VA
24VAC/50 Hz Inrush: 10.66 VA / Holding: 5.99 VA