Gate Valves

Gate Valves

21 Items

Set Descending Direction
  1. Nibco - TI-8 - 2" Full Port Brass Gate Valve
    1068-020 Nibco - TI-8 - 2" Full Port Brass Gate Valve
    In Stock
    Out of Stock
     
  2. Nibco - TI-8 - 2-1/2" Full Port Brass Gate Valve
    1068-025 Nibco - TI-8 - 2-1/2" Full Port Brass Gate Valve
    In Stock
    Out of Stock
     
  3. Nibco - P619RW - 6" Push-On Resilient Wedge Gate Valve
    P-619-RW-060 Nibco - P619RW - 6" Push-On Resilient Wedge Gate Valve
    In Stock
    Out of Stock
     
  4. Nibco - P619RW - 8" Push-On Resilient Wedge Gate Valve
    P-619-RW-080 Nibco - P619RW - 8" Push-On Resilient Wedge Gate Valve
    In Stock
    Out of Stock
     
  5. Nibco - TI-8 - 3" Full Port Brass Gate Valve
    1068-030 Nibco - TI-8 - 3" Full Port Brass Gate Valve
    In Stock
    Out of Stock
     
  6. Leemco - 2" GJ Gate Valve
    LGV-200BB Leemco - 2" GJ Gate Valve
    In Stock
    Out of Stock
     
  7. Nibco - TI-8 - 1" Full Port Brass Gate Valve
    1068-010 Nibco - TI-8 - 1" Full Port Brass Gate Valve
    In Stock
    Out of Stock
     
  8. Nibco - T113K - 2-1/2" Bronze Gate Valve With Cross Handle
    3-025 Nibco - T113K - 2-1/2" Bronze Gate Valve With Cross Handle
    In Stock
    Out of Stock
     
  9. Nibco - TI-8 - 4" Full Port Brass Gate Valve
    1068-040 Nibco - TI-8 - 4" Full Port Brass Gate Valve
    In Stock
    Out of Stock
     
  10. Nibco - P619RW - 4" Push-On Resilient Wedge Gate Valve
    P-619-RW-040 Nibco - P619RW - 4" Push-On Resilient Wedge Gate Valve
    In Stock
    Out of Stock
     
  11. Nibco - T113K - 3" Bronze Gate Valve With Cross Handle
    3-030 Nibco - T113K - 3" Bronze Gate Valve With Cross Handle
    In Stock
    Out of Stock
     
  12. Nibco - T113K - 1-1/2" Bronze Gate Valve With Cross Handle
    3-015 Nibco - T113K - 1-1/2" Bronze Gate Valve With Cross Handle
    In Stock
    Out of Stock
     
  13. Nibco - TI-8 - 1-1/2" Full Port Brass Gate Valve
    1068-015 Nibco - TI-8 - 1-1/2" Full Port Brass Gate Valve
    In Stock
    Out of Stock
     
  14. Nibco - 3" Push-On Resilient Wedge Cast Iron Gate Valve
    P-619-RW-030 Nibco - 3" Push-On Resilient Wedge Cast Iron Gate Valve
    In Stock
    Out of Stock
     
  15. Nibco - T113K - 1" Bronze Gate Valve With Cross Handle
    3-010 Nibco - T113K - 1" Bronze Gate Valve With Cross Handle
    In Stock
    Out of Stock
     
  16. Legend Valve & Fitting - 1/2" Brass Gate Valve
    104-473 Legend Valve & Fitting - 1/2" Brass Gate Valve
    In Stock
    Out of Stock
     
  17. Nibco - P619RW - 2-1/2" Push-On Resilient Wedge Gate Valve
    P-619-RW-025 Nibco - P619RW - 2-1/2" Push-On Resilient Wedge Gate Valve
    In Stock
    Out of Stock
     
  18. Nibco - P619RW - 2" Push-On Resilient Wedge Gate Valve
    P-619-RW-020 Nibco - P619RW - 2" Push-On Resilient Wedge Gate Valve
    In Stock
    Out of Stock
     
  19. Nibco - P619RW - 10" Push-On Resilient Wedge Gate Valve
    P-619-RW-100 Nibco - P619RW - 10" Push-On Resilient Wedge Gate Valve
    In Stock
    Out of Stock
     
  20. Nibco - T113K - 2" Bronze Gate Valve With Cross Handle
    3-020 Nibco - T113K - 2" Bronze Gate Valve With Cross Handle
    In Stock
    Out of Stock
     
  21. Nibco - TI-8 - 1-1/4" Full Port Brass Gate Valve
    1068-012 Nibco - TI-8 - 1-1/4" Full Port Brass Gate Valve
    In Stock
    Out of Stock
     

Shop the Best Irrigation Gate Valves for On-Off Control Without Losing Pressure

A non-rising stem gate valve is ideal for a limited-space irrigation system where positive shutoff is needed. That’s because irrigation pipe gate valves are designed in a way that makes them take up less space. Plus, they’re easier to padlock and more economical. That’s why we offer such a wide variety of these valves from the market’s top brands, like Leemco, Nibco and Legend Valve.

We’ve got any non-rising stem irrigation gate valve you need - from brass irrigation gate valves with screw-in bonnets for pressure-tight seals to cast iron, push-on, resilient gate wedge valves for full flow with minimal pressure drop. Just click to order, and save an additional 1 percent on each order when you get a free Pro Login account.

Sign up today and watch the savings add up!

Get the Best Irrigation Pipe Gate Valve for the Job from Legend, Leemco or Nibco

Irrigation system gate valves are multi-purpose, bi-directional shutoff valves for commercial and industrial applications. These on-off valves are designed to use a sliding plate, slab or wedge within the valve body to stop, limit, or permit full flow. They’re ideal when you need a straight-line flow of fluid and minimum flow restriction.

These valves can also isolate specific areas of the water supply network during maintenance, new installations or other instances in which water flow needs to be rerouted throughout the pipeline. Their simple design can be applied in many low pressure-drop services, which makes them one of the most common valves in use today.

Where space is at a premium and you need positive shutoff, non-rising stem gate valves are the perfect choice. That’s where Reinders comes in, with a wide variety of these space-saving, economical valves in bronze, brass and cast iron.

Bronze gate valves

Bronze irrigation gate valves are fairly inexpensive and extremely ductile, so they resist breaking when bent. They’re also great for resisting corrosion, particularly from any corrosives similar to seawater. That’s why even the ancient Romans made flow control valves out of bronze!

Nibco, known for its high-quality, versatile and economical irrigation gate valves, makes high-quality bronze irrigation pipe gate valves with non-rising stems. These bronze valves are specifically designed for irrigation in-ground applications, with a cross-type operating handle used in conjunction with a remote operating wrench.

Other features:

  • screw-in bonnet for service where infrequent maintenance is required
  • solid wedge, integral seats and bi-directional service
  • female-threaded ends for ease of installation
  • dezincification resistant
  • conforms to MSS SP-80
  • rated at 125 PSI for saturated steam to 353° F and 200 PSI for non-shock cold working pressure

Specifically, Reinders offers the following popular sizes of Nibco bronze non rising stem gate valves for irrigation system pipe, although sizes range from ¼-inch to 3 inches. Please refer to Nibco technical data sheets, chemical resistance guides and catalogs for engineering and installation information:

Brass gate valves

Brass irrigation pipe gate valves are considered by many to be superior to bronze valves in terms of durability, malleability (for bending without cracking) and performance. Brass is more corrosion resistant than bronze, for instance, and has very low (to no) levels of lead. However, brass valves can cost more and may undergo dezincification when in contact with high levels of chlorine.

Reinders carries Legend Valve’s 1/2" S-400 Brass Compact Gate Valve, Sweat x Sweat. It’s rated at 200 PSI for non-shock cold working pressure and a maximum working temperature of 200 degrees Fahrenheit.

Reinders also offers full port brass irrigation gate valves by Nibco. They all offer NPT X NPT end connections and cast-iron handwheels for commercial irrigation systems:

Cast-iron, push-on, resilient wedge gate valves

As far as materials go, cast iron is the most inexpensive choice. Yet it can handle extremely high temperatures and intense vibrations without damage. Cast-iron, resilient wedge irrigation gate valves by Nibco are designed to provide full flow with minimal pressure drop and positive shutoff. These valves also feature IPS PVC push-on end connections for easy installation and accessibility.

These cast-iron gate valves with non-rising stems for irrigation pipe are operated with a square operating nut and wrench. Their fusion-bonded, epoxy-coasted bodies are NSF and FDA certified. And they meet or exceed performance requirements of AWWA C509 and C515 for 3-inch and larger valves.

Other features:

  • 250 PSI non-shock cold working pressure
  • maximum operating temperature of 160ºF
  • bolted bonnet

We offer these valves in a wide variety of sizes, including:

Can’t find the irrigation gate valve model you need for your irrigation pipe system? Just contact us! It’s easy to find what you need at Reinders, with our seasoned pros ready to help. Or, if visiting one of our local stores, check with your friendly in-store associate!

Ductile iron globe valves

In addition to Reinders’ gate valves for on-off control in irrigation pipe systems, we also offer globe valves.

One of the main differences between a gate valve and a globe valve is how they look. The gate valve construction is much simpler. Most of its internal components are located on the top part of the valve body. When it is turned on, its body becomes hollow. That’s why there is a little pressure drop. The gate valve may have a non-rising or rising stem. In comparison, many globe valve parts are inside the cavity itself.

Globe valves are designed to provide a tight, efficient seal to limit the risk of leakage. They’re good throttling valves because their seats are parallel to the media flow, preventing erosion of the seat when the valve is on. Globe valves experience high-pressure drops and are more resistant to water flow when the valve is turned on.

Applications that encounter high temperatures or high pressures call for globe valves. They’re also appropriate when you need a safe, leak-proof solution that resists corrosion. Due to their capabilities, globe valves are more costly than gate valves for irrigation pipes but are a worthwhile expense in certain applications.

If that’s what you need, we offer the Leemco Globe Valve - LGV-200BB. In this valve, lateral to mainline connection is made with a resilient, seated globe valve.

Features include:

  • valve body and restraint clamps made of ductile iron
  • fusion-bonded, epoxy coating on all interior and exterior surfaces (10-12 mm thick)
  • valve mechanism and hardware made of 100-percent 304-series stainless steel
  • valve stem is fine-threaded stainless steel, O-ring sealed for easy operation
  • Spigot X bell connection to mainline fitting, mechanically attached and able to swivel about the base 360 degrees to allow positioning of valve outlet to any desired direction
  • valve outlet is deep bell, gasket and equipped with integrally cast joint restraint clamps to securely fasten pipe to the valve
  • restraint with blunt cast serrations; machine threaded restraints will not be allowed
  • stackable riser extensions

Looking for a different type of valve? Check out many other different kinds sprinkler and irrigation valves carried by Reinders for a variety of different irrigation applications and systems, from top irrigation valve brands like Nibco, Leemco, Legend Valve, Irritrol, Hunter Industries, Toro, Weathermatic and more:

Ball valves – for cutting off and adjusting water flow, including three-way ball valves, which can flexibly cut off, distribute and change the direction of the flow.

Electric anti-siphon valves – that serve as combination control valves and atmospheric back-flow preventers.

In-line electric valves - used to regulate the flow of water on a sprinkler system, but unlike anti siphon valves, do not offer protection from backflow. However, in-line valves are designed to be installed under the ground to hide the plumbing. Usually, they are installed along with backflow prevention devices and vacuum breakers.

New Retail Customers

Creating a Retail Account has many benefits: faster checkout, save multiple addresses, track orders, create wish lists, and more.

Existing Reinders Business Customers

You can quickly connect your existing business account for a simplified shopping experience. Receive all the benefits of a Retail Account plus custom pricing, real-time inventory, access to special promotions, pay your bills online, quick order, and more.

Don’t have a Reinders Business Account yet?

Apply Today!