Mears - 90% Sulfur - 50 LB BAG

Product Label Download SDS

DISPER-SUL® PASTILLE Water degradable sulfur is a 90% sulfur product. Martin uses only the purest sulfur combined with a special formulation of bentonite clay and wetting agents. When applied to the soil DISPERSUL® breaks down into “micro sulfur”. This process assures you that the DISPER-SUL® you apply today will become available plant food during the growing season.

For Use On: Lawn and Gardens

Application

Apply DISPER-SUL® to dry turf and incorporate into garden soils. Watering after application will aid in the dispersion of the sulfur granules. To minimize particle pick-up on turf, do not collect clippings for the first mowing after treatment. Early fall applications are preferred for lawn and gardens. If establishing a new lawn or amending garden soils, the application rates in the table below can be used during soil preparation. In turf (foliar) applications never apply more that 4.0 LBS/ 1000 SQ FT per application or turf discoloration can occur especially during hot dry conditions.

To Reduce Soil pH When Greater Than 7.0:
Lawn and Garden Areas:
On gardens, warm and cool season grasses, apply DISPER-SUL® in split applications in the spring and early fall until the desired soil pH is attained (5.6-6.5)(see table on label for recommendations on different soil types. On medium to heavy textured soils (loam to clay loam) use the higher rate and frequency if a more rapid pH adjustment is desired. Soil pH should be monitored on gardens, lawns, and other turf areas when Sulfur is being used to reduce pH. Turf and garden areas should be sampled twice a year, May and November. Soil samples should be taken from the top one inch of soil.

See Label for complete application instructions.

Restrictions

• Avoid mowing immediately following application to prevent product pick-up.

See Label for complete restrictions.