Toro – 12” 570Z PRX Series Pressure Regulated X-Flow Spray Head with Check Valve

570Z PRX This model comes complete with both the patented X-Flow and pressure regulation-perfect for high or varying pressure, including long lines and slopes.

Features

Patented X-flow® Water Shut-off Device

Up to 40 GAL of water per minute can escape through a spray head that has a missing or damaged nozzle. This wasted water can lead to landscape erosion, property damage, or unsafe conditions due to wet hardscapes. The patented X-Flow device is factory-installed in the riser and holds back over 99% of the water that would otherwise be wasted in cases where the nozzle has been compromised through unintentional accidents or vandalism. Furthermore, X-Flow Technology allows for spray head maintenance or component replacement without the need to turn off the system.

Patented In-riser Pressure Regulator

Maintains constant 30 PSI (2,1 Bar) psi outlet pressure, which minimizes misting and fogging caused by pressures above 30 PSI (2,1 Bar).

Toro’s factory-installed pressure regulator eliminates water misting and fogging at the nozzle that can lead to rapid evaporation or water being blown away from the intended irrigation area. From the first to the last head, the in-stem pressure regulator provides a steady outlet pressure of 30 PSI and consistent spray head performance across the zone.

Zero Flush Wiper Seal

Prevents flushing on pop-up, allowing more sprinklers on the same line.

Enhanced Retraction Spring and Wiper Seal

Robust retraction spring and enhanced seal material ensures positive pop-up and retraction on all 570Z models.

Small 2” (50mm) Diameter Cap

Less visible, reducing damage from exposure or vandals.

Specifications

• Radius: 2'-17' (0.6 - 5.2 m)
• Flow: 0.05-3.45 GPM
• Recommended Operating Pressure: 30-75 PSI (2.1 - 5.2 BAR)
• Inlet: 1/2" (13 mm) female threaded
• Pop-Up Height: 12" (300 mm)
• Body Diameter: 1-5/8" (41 mm)
• Cap Diameter: 2" (50 mm)
• Inlet thread: 1/2” Female