Features
- 150 psi (10,3 bar) rating
- Unique “reverse flow” porting design permits equal
pressure distribution on both sides of the
diaphragm, regardless of line pressure providing
zero stress to prevent “stretching,” a common
cause of valve failure
- Pressure activated diaphragm
- Normally closed valve for water conservation
- Diaphragm’s self-cleaning ports constantly flex,
inhibiting sand and silt from blocking valve action
- Molded shock cone for smooth operation and
reduction of water hammer
- Easy-to-use internal manual bleed lever; bleeds
valve downstream; has stops for open and closed
positions
- High efficiency S20P solenoid with stainless steel
actuator
- High-strength glass-filled body and cover with 1/4
in. stainless steel cover bolts and mating brass body
inserts
- Non-rising flow control stem throttles valve from
full open to closed position on flow control models
Electrical
Wiring requires a single lead from the controller to
each solenoid, plus a common neutral to all
solenoids; type UF wire, U.L. listed, is
recommended for all hookups
24VAC/60 Hz Inrush: 9.48 VA / Holding: 5.11 VA
24VAC/50 Hz Inrush: 10.66 VA / Holding: 5.99 VA