Plant Food Co - Phusion Organic 30% Carbon - 2.5 GAL Jug

Product Label Download SDS

Acidifies water. Destroys bicarbonates. Frees soil bonded Calcium and Magnesium.

pHusion Organic Acid is a modified organic acid derived from Lignin, a natural and renewable raw material that contains carbon and sugars. It acidifies irrigation water; improves water penetration; helps free up bound nutrients in alkaline soil and supplies Carbon to soil microorganisms.

pHusion Organic Acid combines the unique properties of lignin and organic acids. pHusion Organic Acid provides the benefits of dissolving Bicarbonates and lowering pH. The lignin complex acts as a buffering agent against corroding metals which allows pHusion Organic Acid to be applied with conventional spraying equipment, or injected through an irrigation system. Lignosulphonate molecule displays most of the properties attributed to humus present in soils: It is a source of plant nutrients due to the carbon and sulfur present in the pHusion Organic Acid molecule.

Active Ingredient: Calcium, Sulfer

For use on:

• Tees, Greens, Fairways
• Sports Turf
• Cleaning drip irrigation lines

Weeds Controlled

• None

Application

Greens, Tees and Fine Turf: Apply 2.0 - 3.0 OZ of pHusion Organic Acid with 1.5 - 2 GAL of water/1000 SQ FT (0.7 - 1.0 GAL of pHusion Organic Acid with 66 - 88 GAL of water/ACRE) once or twice per month. For best results, irrigate after application to work pHusion Organic Acid solution into the soil.

Fairways & Sports Turf: Apply 0.5 - 1.0 GAL of pHusion Organic Acid with 44 - 88 GAL of water/ACRE (1.5 - 3.0 OZ of pHusion Organic Acid with 1 - 2 GAL of water/1,000 SQ FT) once or twice per month throughout the growing season. Irrigate after applying to move pHusion Organic Acid into the soil.

To stabilize irrigation water pH and scale control for continuous injection treatment, inject 12 - 16 OZ of pHusion Organic Acid in every 1,000 GAL of irrigation water with hardiness of 3,500 ppm and pH of 7.5. Adjust injection rate based on titration test of irrigation water’s hardness and water pH.

Cleaning Drip Irrigation Lines: Injection rates are determined by water alkalinity and water pH. Inject sufficient amounts of pHusion Organic Acid to reduce irrigation water pH to 3. Maintain water in system for a minimum of 30 minutes. In the absence of a titration test, inject 4 to 8 QTS/ACRE per hour for one hour once a month.

Releasing Tied Up Micronutrients (Complexing Agent): Many cation based, non-chelated micronutrients (i.e. ferrous sulfate, manganese sulfate, magnesium sulfate, etc.) can become tied up in soils. Applications of pHusion Organic Acid with these micronutrients “complexes” them, and allows them to be more available to the plant. Apply 12 - 24 OZ of pHusion Organic Acid for every LB of micronutrient. (Example: For 10 LBS of 32% Manganese Sulfate, this represents 3.2 LBS of actual Manganese. Apply 39 - 78 OZ of pHusion Organic Acid to improve availability.

See Label for complete application instructions.

Restrictions

• Store above 40° F. Do not allow to freeze.

See Label for complete restrictions.