Hunter - Wireless Rain-Clik® System

Most rain-sensing devices work by accumulating a set amount of rainfall before a switch is activated that interrupts the circuit from the controller and shuts off the system. In that “accumulation time”, the system will unnecessarily continue to water. This can look especially bad for conservation-conscious municipalities, businesses, and residences. With built-in Quick Response™ technology, the Hunter Rain-Clik® and Wireless Rain-Clik® can command a controller to shut off right when it starts to rain. The Rain-Clik® can be mounted on an eave or any flat vertical surface like a wall or fence. A gutter mount is also available that allows for easy installation of the Rain-Clik® on the edge of a gutter.

Features

• Quick Response™ feature shuts the system off as soon as it starts raining
• Maintenance-free design with 10-year battery life for Wireless Rain-Clik
• Adjustable vent ring allows for setting of reset delay
• Rugged polycarbonate housing and metal extension arm
• Rain-Clik includes 25' of 20AWG sheathed, two-conductor, UL-approved wire
• Wireless unit available with 800FT. range from wireless sensor to receiver
• Warranty period: 5 years (10 year battery warranty for wireless model)
• Compatible with most controllers

Specifications

• Wiring: "normally open" or "normally closed"
• Time to turn off irrigation system: 2 to 5 minutes approx. for Quick Response
• Time to reset Quick Response: 4 hours approx. under dry, sunny conditions
• Time to reset when fully wet: 3 days approx. under dry, sunny conditions
• UL listed, CUL (CSA), CE
• Switch rating: 24VAC, 3A
• Freeze sensor shuts system off when temperatures fall below 37˚F (Rain/Freeze-Clik model)
• System operating frequency: 433 MHz
• UL listed, FCC approved, suitable for use in Australia, CUL (CSA), CE
• Communication range up to 800FT. line of sight (Wireless model)
• Receiver input power: 24VAC (from controller)