Toro - Flex800 Series Conversion Assembly - 1" Full Circle With Large Nozzle Set


Toro - Flex800 Series Conversion Assembly - 1" Full Circle With Large Nozzle Set
Choose Favorites List
Enlarge

Toro - Flex800 Series Conversion Assembly - 1" Full Circle With Large Nozzle Set


SKU: FLX34-3537
Territory Restriction Icon
Only Available for Sale in our Authorized Territory Restrictions may apply. Call (262) 372-5860 with any questions
  • Flex800 Series Conversion Assembly - 1" Full-Circle Ribbed Body With Large Nozzle Set & Dual TruJectory
  • 35-37 Nozzle Set Included
  • Trajectory: 25° or 15°
  • Radius: 67' - 91'
  • Flow Rate: 32.1 - 46.9 GPM 
  • Economically upgrade your existing Toro system
  • Replaces models: 634, 664, 734, 764 765, 864S, 865S, 834S, 835S, DT34, DT35

Economically upgrade your existing Toro system.

Replaces models:

  • 634
  • 664
  • 734 
  • 764
  • 765 
  • 864S
  • 865S
  • 834S
  • 835S
  • DT34
  • DT35

Benefits of upgrading

  • Industry's largest nozzle selection - Nozzles from 42’ to 100' radius plus a wide assortment of back nozzles lets you put the precise amount of water exactly where you need it. All nozzles threaded in from the front.
  • 20,000 Volt lightning rating - Spike-Guard solenoid virtually eliminates the need for replacements in high lightning areas. Draws half the amperage of traditional solenoids so you can run twice as many sprinklers simultaneously, reduce the cost of wire during initial installation or increase the distance from controller to sprinkler.
  • Adjustment with no disassembly - Toro exclusive, simply pull up the riser and ratchet it to the precise position you want to water.
  • True part and full-circle in one - (40° - 330° part circle) These sprinklers can be full circle or part circle allowing you to adjust the area of coverage to match your seasonal needs or meet water rationing mandates.

SPECIFICATIONS

Technical

  • Full Circle Arc
  • Trajectory: 25° or 15°
  • Radius: 67' - 91'
  • Flow Rate: 32.1 - 46.9 GPM 

Operational

  • Ratcheting riser allows riser positioning without riser removal.
  • Recommended Operating Pressure Range: 60-100 PSI (maximum – 150 PSI and minimum – 40 PSI)
  • Radius reduction screw for radius refinement
  • Riser pull-up feature simplifies servicing
  • Effluent identifier included
  • Yardage marker capable
  • 3-1/4” pop-up clears tall grasses

Nozzles

  • 35-37 Nozzle Set Included
  • 4 main nozzle combinations included provides a wide range of radius and flow capabilities.
  • All nozzles threaded from the front with no other disassembly required.