FX - Aluminum 3 LED 18" Riser - Bronze Finish

FX - Aluminum 3 LED 18" Riser - Bronze Finish
Choose Favorites List

FX - Aluminum 3 LED 18" Riser - Bronze Finish

  • Purchase $2500 worth of FX Luminaire products on a single order, and receive a $200 Visa Gift Card
  • 18 inch, 3 LED Riser Assembly with a Bronze finish
  • Customize your pathlight with your choice of riser assembly, or replace a damaged assembly. Riser assemblies are availabe in 12 or 18 inch, in several different finishes

Aluminum Riser 3 LED 18" - Bronze Finish.

Expand your design choices by custom creating your FX Luminaire path lights. Chose a top assembly and then the riser you need to complete your custom look. This riser is compatable with Top Assemblies TMLEDTA and PLLEDTA. It includes a 3-LED board which is equivelent to a 20 watt Halogen.  Risers are also available in 8", 12", 18", 24" and 36" heights, so you can chose the right height for your project. Some risers are compatible with Luxor controller and are indicated with a ZD or ZDC. 

Take Advantage of Superior LED Technology
LED based landscape lights provide a number of distinct efficiency and practical advantages. Because of these advantages, LED optimization is the future of the industry. With our cutting edge technology and unmatched attention to detail, we're proud to be at the front of the pack, leading the way.

Halogen based lights can take anywhere between 10 and 50 watts of power each, and sometimes more. LED fixtures require roughly 80% less voltage, which means lower energy costs, longer lamp life, and better environmental citizenship for the end user.

As their watt consumption is significantly higher, traditional fixtures become very hot, so much so they cannot be touched after running for only a few minutes. LEDs create heat as well, but far less than traditional lighting. This results in a longer lamp and fixture life. To ensure our products live as long as possible, FX LED feature heat sinks, as well as temperature sensors. If a fixture is getting too hot, the FX board will automatically pull back current which will actively cool the fixture down.

Traditional lighting required multiple wires to each set of lights to ensure all lights are outputting the same level of illumination. It is a complex and time-consuming process. With FX LED fixtures, a built-in device called a driver takes all the power it is receiving and delivers it to each LED within a fixture so they are always at the same light level, regardless of the voltage supplied.

Depending on the application LEDs can last 50,000 hours or more. At the end of their life they don’t just burn out like a traditional lights. LEDs slowly dim over time and at very low levels, so even after 50,000 hours of use in most situations LEDs will continue to illuminate sufficiently.

Always remember that Landscape Lighting is an art, and just like an irrigation system, it requires a professional to plan, install, and maintain. In order to achieve safe, optimal, and long life from a lighting plan, a qualified installer should always be consulted to create the functions that an end user is looking to get from a lighting plan.