Features

• Proven impact drive.
• Straight-through flow for superior performance in dirty water.
• FP trip allows full- or part-circle operation. Adjustable from 20° to 340°.
• Die-cast Precision Jet tube (PJ™) minimizes side splash.
• Stainless steel distance control diffusion pin and DA distance control flaps allows up to 25% radius reduction without changing nozzle.
• Rugged brass, bronze, and stainless steel construction. 

Operating Range

• Precipitation Rate: 0.41 to 0.66 inches per hour (10 to 17 mm/h)
• Radius: 38 to 41 feet (11,6 to 12,5 m)
• Pressure: 30 to 50 psi (2,1 to 3,5 Bars)
• Flow: 3.1 to 5.0 GPM (0,70 to 1,14 m³/h; 0,20 to 0,32 l/s)

Specifications

• 1/2" (15/21) male threaded inlet
• For 10 nozzle at normal operating pressure, the highest point of stream is 7 feet (2,1 m) above nozzle.
• Nozzles: 09, 10

Models

• 25BPJ-FP-ADJ
• 25BPJ-FP-ADJ-DA
• 25BPJ-FP-ADJ-DA-TNT
• 25BPJ Special

Return To Top

• 52'-83' Radius (730 Series)
  
• 56'-100' Radius (750 Series)

• Full 3" pop-up to clear taller grasses
• Nozzles color coded by radius and gallonage
• Caps serve as yardage markers or effluent water indicators
• Four standard pressure regulation settings available to ensure consistently accurate performance - regardless of elevation:
  
  • 50 PSI, 65 PSI, 80 PSI and 100 PSI (electric)
• Three body styles/activation types available to fit every application: Electric VIH, Normally Open Hydraulic VIH, and Check-O-Matic
• Manual control at the sprinkler, On-Off Auto (electric)
• Bowl-vented discharge (atmospheric) minimizes the differential pressure required for regulation and ensures positive valve closure (electric)
• Time-proven planetary gear-drive design
• All internal components serviceable from the top of the sprinkler
• Large selection of nozzles available
• ACME, NPT and BSP body threads available
• Durable engineering plastic and stainless-steel construction
• Effluent indicators available:
  
  • Marker (Part No. 89-4719)
    
  • Yardage marker (Part No. 89-4736)

• Radius 52'-83'
• Flow rate: 11.0-41.2 GPM
• 1" female-threaded inlet
• Full-circle
• Dimensions:
  
  • Height: 11"

• Radius 56'-100'
• Flow rate: 13.0-60.1 GPM
• 1 1/2" female-threaded inlet
• Full-circle
• Dimensions:
  
  • Height: 11"

· These precision brass nozzles are easily discernable, even from a distance, by their unique and attractive water pattern.

· Mill cut part circle nozzles dramatically enhance performance offering two separate layers of water at different velocities, providing the ultimate in pattern uniformity and water conservation.

· Optimal operational pressure is rated at 20 psi, (1.4 bar), substantially lower than other designs that require over pressurization to improve pattern performance.

· Small uniform water droplets generated by the nozzle fall closer to the sprinkler providing an exceptionally consistent pattern and eliminate the need for conventional "head to head" spacing.

· Industry standard threads allow these extended performance nozzles to be installed on most competitive manufactures of spray heads providing a quick and easy upgrade to existing systems.

· Large inlet porting on 5520 -5524 nozzles allows more debris to pass through it offering superior contamination resistance in dirty water or reclaimed applications.

· Single port brass nozzles can be easily cleaned with out risk of permanent damage and in many cases with out removing the nozzle from the head.

· These nozzles provide the widest selection of any other matched precipitation family on the market today. 80 nozzles are available, offering seamless spacing transitions from 3 ft to 20 foot and flows ranging from 0.3 GPM to 7.5 GPM.