Features

• Permits convenient conversion to drip tubing when used with compression adapter.
• Provides 30 psi (2,0 Bars) pressure regulation and 200-mesh (75 micron) screen that is easily accessible.
• Internal assembly drops into any 1804, 1806, or 1812 spray head body to easily retrofit existing system to Xerigation products.
• Can be installed above or below grade.
• If retrofit flow is less than 3 GPM, replace electronic valve with Rain Bird Control Zone Kit.

Operating Range

• Flow: 0.5 to 4 GPM (0,11 to 0,91 m³/h; 0,3 to 0,25 l/s)
• Inlet Pressure: 15 to 70 psi (1,0 to 5,0 Bars)

Dimensions

• 1/2" (15/21) female-threaded inlet
• 1/2" (15/21) male-threaded swivel outlet
• Height: 7" (17,8 cm)
• Width: 2" (5,1 cm)

Model

• RETRO-1800

Xeri-Caps for Spray Heads

Features Used to retrofit a spray head system to a Xerigation system by capping off any unused spray heads. Operating Range Pressure: 0 to 70 psi (0,0 to 5,0 Bars) Dimension Width: 2 1/4" (5,7 cm) Models XC-1800: fits Rain Bird 1800 Series sprays XC-T-570: fits Toro®  570 Series sprays Toro is a registered trademark of the Toro Company. Retrofit Pressure Regulator Features Provides convenient 30 psi (2,0 Bars) pressure regulation at the riser for any  1/2” FPT emission device or compression adapter. Can be installed above or below grade. Operating Range Flow: 0.5 to 4 GPM (0,11 to 0,91 m3/h; 0,3 to 0,25 l/s) Inlet Pressure: 15 to 70 psi (1,0 to 5,0 Bars) Dimensions 1/2" (15/21) female-threaded inlet Height: 4" (10 cm) Model PRS-030 Return To Top Back to Reinder's Home Page